 |
 |
 |
|
- 32 Channels
- 30FPS @ 12MP
- 256Mbps Throughput
- 6TB Hard Drive
- iPhone/Android Compatible
- Internet Explorer/Chrome/Firefox/Safari
- HDMI/VGA
Specifications Streaming Video Inputs & Recording - Maximum Number of IP Cameras - 32
- Number of built in PnP/PoE Switch Ports - 16
- Supported Live View/ Record Resolutions - up to 12MP / 5MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
- Sub-stream - Supported for recording, playback and live viewing
- Audio streaming - Supported from audio capable cameras
- Maximum FPS rate per camera - 30FPS Main stream; 30FPS Sub-stream Up to 960FPS total for 32 cameras
- Maximum Record Streaming Video Input Bandwidth (all cameras combined) - 256 Mb/s
- Recording Compression - Depends on IP Camera; typically H.264 for main stream, MJPEG for sub-stream
- Recording Modes - Continuous, Motion, Alarm, Motion+Alarm, Motion or Alarm
- Motion Detection - Camera Side, configurable from NVR for KNC-p3 Omni IP Series Cameras
- Schedule Period - Per day in 1 hour blocks; or 8 time periods per day, each with different record mode; plus holidays
- Pre- and Post- Event Recording - Pre-record 0~30 seconds; post record 5s~10 minutes
- Built in network switch port speed - 10/100 Mb/s each port
- KT&C Omni-IP 'hands free Plug and Play' Cameras Fully Supported - KNC-p3BR4IR, KNC-p3BR6IR, KNC-p3BR12IR, KNC-p3DR4IR, KNC-p3DR3IR,KNC-p3DR6IR, KNC-p3DR12IR, KNC-p3BR4XIR, KNC-p3BR6XIR, KNC-p3BR12XIR, KNC-p3TR4XIR, KNC-p3TR3XIR, KNC-p3TR6XIR, KNC-p3LR4IR, KNC-p3LR3IR, KNC-p3LR6IR, KNC-p3BR28V12IR, KNC-p3DR28V12IR, KNC-p4BR4XIR, KNC-p4DR4IR, KNC-p4LR3IRA, KNC-p4TR4XIR
- Third Party Cameras Supported (requires traditional configuration and setup) - Onvif; Acti, Arecont, Axis, Bosch, Brickcom, Canon, Hikvision, Hunt, Panasonic, Pelco, Samsung, Sanyo, Sony, Vivotek, Zavio
Local Live Presentation of Streaming Video/Audio - Local Display Main Monitor Outputs HDMI- HDMI 60Hz: 4K (3840 x 2160), 2K (2560 x 1440), 1920×1080, 1600×1200, 1280×1024, 1280×720, 1024×768
- Local Display Main Monitor Outputs VGA - VGA 60Hz: 1920×1080P, 1600×1200, 1280×1024, 1280×720, 1024×768
- Camera Display Layouts- 1, 2x2, 1+5, 1+7, 3x3, 4x4, 5x5, 32 (in 6x6)
- Automatic Stream Selection- Single camera view and 2x2 at main stream resolution; Automatic switching to sub-stream resolution in >4 cameo multi-view display to conserve CPU capacity and maintain parity between per-camera screen area and image size
- Audio Output (requires audio equipped cameras)- 1-ch Line Level, synced to VGA; HDMI audio on HDMI monitor output (requires audio equipped cameras)
Playback of Recorded Video/Audio - Supported Playback Resolutions - up to 12MP/ 5MP / 3MP / 1080P / UXGA / 720P / VGA / 4CIF / DCIF / 2CIF / CIF / QCIF
- Local Display Playback Maximum Video Bandwidth (all cameras combined) - ~32Mb/s nominal
- Nominal Local Playback Capability - 4 channels @ 4K; 16 channels @ 1920x1080 Reduced total bandwidth permits greater number of cameras to be played. (actual playback depends on decoding load which varies based on settings for recorded video bandwidth restrictions, resolution, image quality, FPS rate, compression efficiency, and complexity of pixel change in the scene)
- Playback search modes - Time/Date; Event (Alarm, Motion, VCA); Manual Tags; Smart Search for motion events from recorded video, POS (with required firmware)
- Playback Controls - Play; Pause; Forward/Reverse; speed control for single~1.8~Vmax (256x); Slide bar with overview of record type and snapshot display from slider position
- Digital Zoom During Playback - Supported on Local Displays, CMS, and web browser
Local Hard Drives and Other Storage - Number of Internal Hard Drives- Up to 4 SATA HDD; up to 4TB each for 16TB maximum
- Redundant Recording- Yes
- S.M.A.R.T - With extensive statistics, alarms, on demand tests and reporting
- Record to - HDD, NAS or SAN
- Archive to - USB
Local Plug and Play Camera Network Support - Integral PoE Switch- 16 Ports 10/100 Mb/s
- Camera Network Security - Option to enable pass though access from LAN/WAN to cameras, or to isolate camera network from LAN/WAN for increased security
- PoE Type- 802.3at Max 30W per port
- Total Power Budget- 200W all ports
- PnP Network Support (Using KT&C KNC-p3 Omni-IP Series cameras connected to internal PnP PoE switch ports)- Integral DHCP function with address-per-port initial assignment Internal bridge can forward connections from LAN/WAN network port to individual IPC for remote access to IPC OSD detail config menus (Using KT&C KNC-p3 Omni-IP Series cameras connected to internal PnP PoE switch ports)
- Built in Web Server Interface- Live view, playback & config via IE, Chrome, Firefox, Safari (with free plug-in/extension installed)
- CMS- PC and MAC Client supports multiple device viewing, playback (with digital zoom) and configuration; user rights per camera; E-map support; live view up to 64 cameras in 4:3 and 48 cameras in 16:9; up to 16 cameras in playback
- Mobile Apps- iOS and Android supported; live 16 camera views; 4 camera playback; snapshots from live or play; copy clips/record to smartphone; audio support; PTZ control. HD version of app, optimized for tablets, is available
- User Rights Control- Per user-per camera for multiple functions
- Event Logging- Multiple types: alarm, exception, operation, information; dozens of sub-types within each major type
- Firmware Upgrade- From USB or remotely
- Backup/Restore Configuration- For NVR settings and for IP Camera settings; from USB or remotely
Network and Other Interfaces - LAN/WAN Network Port- One 10/100/1000Mb/s RJ-45 port
- Connection of non-PnP IP cameras - Supported
- Remote Monitoring Output Maximum Bandwidth - 256Mb/s
- Maximum number of remote connections - 128
- DST/NTP- Supported; choice of time zone, NTP server, DST start/end/offset
- Port Mapping/uPnP - Automatic port forwarding/redirection using uPnP on routers with this capability
- Serial Interfaces - 1xRS-232 DB9; 1xRS-485; 1xKeyboard controller input
- USB 2.0 Interfaces - 2 front; 1 rear
- Audio Input - 1 RCA
- Alarm Inputs - 16
- Alarm Outputs - 4 single pole
General Mechanical and Environmental - Power Input - 100~240VAC, up to 300W max. continuous/450W peak, 50~60Hz; USA Power Cord
- Continuous Power Consumption - Up to 45W for NVR; up to 200W for PoE
- Operating Temperature - 14°F ~ 131°F (-10°C ~ +55°C)
- Operating Humidity Range - 10% ~ 90%
- Cooling Fan - 1, in power supply
- Size - 1.5U Rack mountable chassis (rack ears provided) 17.52" x 15.35" x 2.76" (445 x 390 x 70mm)
- Weight (without hard drives or ODD)- 8.8 lb./4 Kg allow ~1.4 lb. per HDD
- Certifications - FCC, CE, RoHS
|
|
|
 |
|
 |
|
|
|
